WTX Development Co.
The Speight: rendering of the home
House plan · Instant PDF download

The Speight

A WTX Development Co. design for Waco, Texas · rendering shown

Plan price$500
Beds6
Baths6.5
Living sq ft2,636
Stories3
GarageNone
Width32'-0"
Depth38'-0"

A three-story, 6 bed / 6.5 bath home on a compact footprint, laid out for student or shared housing: an open kitchen, dining and living level with a powder room, four bedrooms with private baths and a laundry on the second floor, and two more bedrooms with private baths on the third. Front and back porches. The drawings call for an NFPA 13D residential fire sprinkler system.

Stock plan, local adaptation required. These plans show the home as we designed it for Waco, Texas. They are a stock plan, not site-specific construction documents. Before you permit or build, a licensed architect, engineer or qualified residential designer in your area must adapt them to your lot, local codes and site conditions, and design the foundation and structure. Purchase includes a license to build one home. At checkout you'll confirm you understand this. Plan license & terms

Why this plan

Three-story 6 bed / 6.5 bath shared-housing plan on a 32' wide footprint

  • Six bedrooms with six full baths plus a powder room on a 32' × 38' footprint.
  • Kitchen, dining and living on the first floor; four bedroom suites and the laundry on the second; two more suites on the third.
  • Laid out for student and shared housing, with every bedroom getting its own bath.
  • Drawn with an NFPA 13D residential fire sprinkler system.
Sq ft per bedroom439
Footprint32'-0" × 38'-0"
BathroomsA full bath for every bedroom
Living levelsThree stories
What's included

The full construction set

One PDF, sized to print at 24×36 (or half-size on 11×17), with every sheet your local architect or designer needs to adapt the home to your lot.

Before you buy

Read the full plan license & terms

Questions about this plan

What lot width do I need?

The home is 32'-0" wide and 38'-0" deep (outside of foundation). Add your city's side setbacks, and any driveway or access requirement, to the 32'-0" width. Your local architect or designer confirms the fit.

Can the plans be changed?

Yes. The plans are a starting point. The local architect, engineer or designer who adapts them to your lot can also make layout or finish changes before you permit.

Is a foundation or structural design included?

No. Foundation and structural design depend on your soil and site, so a licensed engineer in your area designs them.

What do I receive?

One PDF of the full plan set (6 sheets), sized for 24×36 printing, available to download right after checkout.

Can I build more than one?

Each purchase is a license to build one home. Contact us if you plan to build more.

Questions

Ask about The Speight

Want to know whether it fits your lot, or what changes are possible? Send us a note. You can also email info@wtxdevelopment.com.