The Proctor II
A WTX Development Co. design, built in Waco, Texas
A two-story, 4 bed / 3.5 bath home with an open kitchen, living and dining core downstairs, a primary suite plus three bedrooms upstairs, a front porch, covered back patio and an attached 2-car garage. Designed and built by WTX in Waco, Texas.
Stock plan, local adaptation required. These plans show the home as we designed and built it in Waco, Texas. They are a stock plan, not site-specific construction documents. Before you permit or build, a licensed architect, engineer or qualified residential designer in your area must adapt them to your lot, local codes and site conditions, and design the foundation and structure. Purchase includes a license to build one home. At checkout you'll confirm you understand this. Plan license & terms
Plan previews watermarked, low resolution
The full construction set
One PDF, sized to print at 24×36 (or half-size on 11×17), with every sheet your local architect or designer needs to adapt the home to your lot.
- A1.1 Cover sheet, roof & flatwork plan
- A2.1 Floor plans, wall type, door & window schedules
- A2.2 Lighting / power plans
- A2.3 Plumbing plans
- A3.1 Exterior elevations, typical exterior wall section
Before you buy
- You will need a local professional. A licensed architect, engineer or qualified residential designer in your area must review and adapt these plans to your lot, city, county and state before you permit or build.
- Foundation and structural design are not included. They depend on your site and soil and must be designed by a licensed engineer.
- One home per purchase. Your license covers building one home. Please don't share or resell the plans.
- Instant download. After checkout you'll land on a download page, and your link keeps working for 30 days.
Ask about The Proctor II
Want to know whether it fits your lot, or what changes are possible? Send us a note. You can also email [email protected].